FANUC ARCMATE 100IB MIG WELDING CELL WITH RJ3iB CONTROLLER

1-USED SUPER CLEAN FANUC ARCMATE 100IB MIG WELDING CELL WITH RJ3IB CONTROLLER ROBOT SERIAL NUMBER F54236 DATE OF MFG. 06/2002 STK#103830 =============================== SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION BY BUYER: HOURS SHOWN ON METER 2,265.8 THIS UNIT IS VERY CLEAN WITH LOW USE. UNIT IS SELF CONTAINED MOUNTED ON A COMMOND BASE WITH ALL RELATED COMPONENTS THAT MAKE UP THE CELL THE CONTROLLER CABINET IS MOUNTED OUTSIDE THE WELD CELL. SEE PICTURES. Robot Specifications: Axes: 6 Payload: 6.00kg H-Reach: 1373.00mm Repeatability: ±0.0800mm Robot Mass: 135.00kg Structure: Articulated Mounting: Floor, Inverted, Wall, Angle Robot Motion Speed J1 150 °/s (2.62 rad/s) J2 160 °/s (2.79 rad/s) J3 170 °/s (2.97 rad/s) J4 400 °/s (6.98 rad/s) J5 400 °/s (6.98 rad/s) J6 520 °/s (9.08 rad/s) Robot Motion Range J1 ±170° J2 +160° - 90° J3 +145° - 170° J4 ±190° J5 ±140° J6 ±360° EQUIPPED WITH: FANUC ARCMATE 100IB WELDING ROBOT ARM FANUC ARMATE RJ3IB ROBOT CONTROLLER CABLES TEACH PENDANT LINCOLN ELECTRIC TRUNNION LINCOLN ELECTRIC TORCH TIP CLEANER LINCOLN ELECTRIC WIRE FEEDER LINCOLN ELECTRIC POWERWAVE 455M WELDING POWER SUPPLY WWW.HABROMACHINERY.COM 231-526-9525